 |
New Page 2
|
|
The Terminator
- Basket is cast
steel.
- Wedge socket
terminations have an effeciency rating of 80% based on the catalog
strength of XXIP wire rope.
- Crosby products meet or exceed
all the requirements of ASME B30.26 including identification,
ductility, design factor, proof load and temperature requirements.
Importantly, Crosby products meet other critical performance
requirements including fatigue life, impact properties and material
traceability, not addressed by ASME B20.26.
- Individually magnetic particle
inspected.
- Pin diameter
and jaw opening allows wedge and socket to be used in conjunction with
open swage and spelter sockets.
- Secures the
tail or "dead end" of the wire rope to the wedge, thus
eliminates loss or "Punch out" of the wedge.
- Eliminates the
need for an extra piece of rope, and is easily installed.
- The
TERMINATOR™ wedge eliminates the potential breaking
off of the tail due to fatigue.
- The tail,
which is secured by the base of the clip and the wedge, is left
undeformed and available for reuse.
- Incorporates
Crosby's patented QUIC-CHECK® "Go" and
"No-Go" feature cast into the wedge. The proper size rope is
determined when the following criteria are met:
- 1) The wire
rope should pass thru the "Go" hole in the wedge.
- 2) The wire
rope should NOT pass thru the "No-Go" hole in the wedge.
- Utilizes
standard Crosby Red-U-Bolt® wire rope clip.
- Standard S-421
wedge socket can be retrofitted with the new style TERMINATOR™
wedge.
- Available with
Bolt, Nut, and Cotter Pin.
- U.S.
patent 5,553,360 and foreign equivalents.
Wedge socks meet the performance require-ments of Federal
Specification RR-S-550D, Type C, except those
provisions required of the contractor.
|
| S-421T Wedge Sockets |
| |
|
Wire Rope Dia. (in.)
|
S-421T
Stock No.*
|
Weight
Each
(lbs.)
|
S-421 TW
Stock No.
Wedge Only
|
Wedge
Only Weight
Each
(lbs.) |
Optional
G-4082
Bolt, Nut & Cotter |
G-4082
Stock No. |
Weight
Each (lbs.) |
| 3/8 |
1035000 |
3.18 |
1035555 |
.50 |
1092227 |
.38 |
| 1/2 |
1035009 |
6.15 |
1035564 |
1.05 |
1092236 |
.69 |
| 5/8 |
1035018 |
9.70 |
1035573 |
1.79 |
1092254 |
1.15 |
| 3/4 |
1035027 |
14.50 |
1035582 |
2.60 |
1092281 |
1.91 |
| 7/8 |
1035036 |
21.50 |
1035591 |
4.00 |
1092307 |
3.23 |
| 1 |
1035045 |
30.75 |
1035600 |
5.37 |
1092325 |
5.40 |
| 1-1/8 |
1035054 |
45.30 |
1035609 |
7.30 |
1092343 |
7.50 |
| 1-1/4 |
1035063 |
64.90 |
1035618 |
10.60 |
1092372 |
10.34 |
|
| |
Wire
Rope
Dia.
(in.) |
S-421T
Stock No.*
|
Dimensions
(in.) |
| A |
B |
C |
D |
G |
H |
J** |
K** |
L |
P |
R |
S |
T |
U |
V |
| 3/8 |
1035000 |
5.69 |
2.72 |
.81 |
.81 |
1.38 |
3.06 |
7.80 |
1.88 |
.88 |
1.56 |
.44 |
2.13 |
.44 |
1.25 |
1.38 |
| 1/2 |
1035009 |
6.88 |
3.47 |
1.00 |
1.00 |
1.62 |
3.76 |
8.91 |
1.26 |
1.06 |
1.94 |
.50 |
2.56 |
.53 |
1.75 |
1.88 |
| 5/8 |
1035018 |
8.25 |
4.30 |
1.25 |
1.19 |
2.12 |
4.47 |
10.75 |
1.99 |
1.22 |
2.25 |
.56 |
3.25 |
.69 |
2.00 |
2.19 |
| 3/4 |
1035027 |
9.88 |
5.12 |
1.50 |
1.38 |
2.44 |
5.28 |
12.36 |
2.41 |
1.40 |
2.63 |
.66 |
3.63 |
.78 |
2.34 |
2.56 |
| 7/8 |
1035036 |
11.25 |
5.85 |
1.75 |
1.63 |
2.69 |
6.16 |
14.37 |
2.48 |
1.67 |
3.13 |
.75 |
4.31 |
.88 |
2.69 |
2.94 |
| 1 |
1035045 |
12.81 |
6.32 |
2.00 |
2.00 |
2.94 |
6.96 |
16.29 |
3.04 |
2.00 |
3.75 |
.88 |
4.70 |
1.03 |
2.88 |
3.28 |
| 1-1/8 |
1035054 |
14.38 |
6.92 |
2.25 |
2.25 |
3.31 |
7.62 |
18.34 |
2.56 |
2.25 |
4.25 |
1.00 |
5.44 |
1.10 |
3.25 |
3.56 |
| 1-1/4 |
1035063 |
16.34 |
8.73 |
2.62 |
2.50 |
3.56 |
9.39 |
20.48 |
2.94 |
2.34 |
4.50 |
1.06 |
6.13 |
1.19 |
4.62 |
4.94 |
* S-421T TERMINATORTMAssembly
includes Socket, Wedge, Pin and Wire Rope Clip.
** Nominal
NOTE: For intermediate rope sizes, use next larger size
socket. |
All Content © 2009 Whitelaw Rigging & Fab Inc. |
